Latest Fluke 18B+ Plus AC DC Voltage Current Digital Multimeter DMM with LED

Latest Fluke 18B+ Plus AC DC Voltage Current Digital Multimeter DMM with LED
  • Продавец
  • Список ценUS $107.99piece
  • Продажная ценаUS $107.99piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,8 (546)

Oписание продукта



Brief Introduction:

U981x series impulse winding tester adopts high stability & high-voltage impact power and thyristor module controlled high-voltage switching devices, which bring a substantial increase in the stability and reliability of the product. With advanced 32 bit CPU and high speed FPGA, 100Msps sampling rate and memory depth of 6500 bytes make the test more precise; the use of high speed testing technique make the maximum test speed up to 15 meas/sec.


■ Delta and star connection of three-phase machine, Primary and secondary windings, primary and secondary secondary windings, primary and secondary + primary and secondary windings of single-phase machine can be tested; satisfying motor interturn testing of all series (U9845, all-powerful motor test)
■ Provide 8-channel sweep test at most (U9805X)
■ Two-channel comparison test, dispense with standard waveform acquisition
■ 65k color 7" TFT high definition display screen, selectable Chinese and English interfaces
■ Waveform sampling rate:100Msps; memory depth: 6500bytes
■ Max. Test speed: 12 meas/sec
■ Four waveform comparison methods: Area, differential area, corona and differential phase
■ Strong corona analysis and extraction function (several corona modes and corona display function) to excavate potential defective insulation of products
■ Excellent test repeatability to guarantee stable measurement
■ Instrument parameters automatic storage and boot-up file load function
■ Vertical exaggeration, horizontal zoom and movement of waveforms for detail observation
■ Sample average function, average processing of 32 standard waveforms
■ Automatic standard acquisition mode to select suitable sampling rate
■ Destructive testing bring the right test voltage for you
■ Fast test mode can make real-time change of impulse voltage and sampling rate
■ Imposed demagnetized impulse to ensure the conformity of the tested waveforms
■ 20000 pieces of historical measured data storage and discrimination statistics function; can be saved to the U-disk
■ Directly save the screen pictures (BMP, GIF, PNG) or waveform data to U-disk through SAVE key
■ System firmware upgrade through U-disk
■ Foot switch interface for easy and fast measurements
■ Handler.RS232C.USB Device.USB Host and GPIB(option)


Impulse voltage100V~3000V, 10V step,5%±10V100V~5000V,10V step,5%±10V200V~6000V,10V step,5%±10V300V~10000V,10V step,5%±10V
Inductance test range≥10uH≥50uH
Impulse energyMax.: 0.09 JouleMax.: 0.25 JouleMax.: 0.36 JouleMax.: 0.5 Joule
Test speedMax.15meas/secMax.12meas/secMax.8meas/sec
Applied pulsesMax. 32 of test pulse; max.8 of demagnetizing pulse
Input impedance10M
Display800x480 dot 65k color TFT;Waveform display range: 650x256, support 1.5 times magnifying display
Waveform acquisitionSampling rate: max.100Msps, adjustable 10 levels;Resolution: 8 Bits;Memory Depth:6500 bytes;Sample average:1-32
Comparison methodsArea, differential area, corona and differential phase
Test repeated accuracy±1%
Waveform measurementVoltage/Frequency/Time of the waveform
Trigger ModeManual (including foot switch)/External/Internal/Bus
Detection OutputOK/NG display, LED / alarm
Test statisticsStatistics function of measurement time and results, up to 20000 pieces
MemoryInternal300 groups (standard waveform data and test setup parameters)
U-disk600groups (standard waveform data and test setup parameters)
USB Device(support USB TMC and USB CDC)
USB Host(support FAT16 and FAT32, storage of BMP, GIF, PNG image files, waveform data and statistical data in CSV format, storage of setup files)
Power supply
Power supply220V±10%  50Hz±5%
Power consumption≤50VA
General conditions
Working environmentTemperature0° - 40°
Humidity≤75% R.H.
Dimension (HxWxD)132mmx400mmx350mm